Provides two offset load rated rigging points from structural I-Beams with flange widths ranging between 12” and 17” (304-431 mm). This beam clamp model provides a fast, easy and safe way to rig direct loads, bridles and hitches. A hand wrench is all that is required to secure the clamp to the beam. *IMPORTANT – Beam flanges must be parallel to the floor to achieve the stated safe working loads.
NOTE: Recommended torque = 40-50 ft/lb
|Material: All Steel Components||2 pcs 5/8” eye nut|
|Width:(BC12-17-2) 12” to 17” / 304mm to 406mm||1 pc Channel Clamp|
|WLL:980 lb / 445 Kg WLL (VERTICAL)|
|Finish: Powder Coat|
|Design Factor: 5:1|
|45 DEG. 578 lb / 261 Kg|